top of page

KUSSMAUL ELECTRONICS 023-4346-0 DC Energy Display, DCE

In stock
Product Details
Brand: Kussmaul Electronics


  • Displays 12 or 24 volts
  • Displays up to 500 amps
  • Displays energy used and remaining for up to 3,000 amp-hour capacity
  • Monitor voltage on up to three separate banks of batteries
  • Monitors Charge / Discharge Amperage
  • Monitors Total Energy: Amp-Hours or Percent of Charge
  • Alarms: High / low voltage and low amp-Hours remaining
  • 3 year warranty


Warranty 3 Years
Weight .25 Lbs
Power Supply 9.5 To 33.0 VDC, .018 Amps Nominal
Operating Temperature 32 To 122 F (0 To 50 C)
Accuracy Better Than +/- 0.1 VDC For Volts And 1% +/- 1 Amp For Amps
Volts Range 9.5 To 33.0 VDC
Amps Range -500 To +500 Amps (Applies To Bank 1 Only)
Capacity Remaining Range -0 To +100% (Applies To Bank 1 Only)
Shunt 500 Amp, 50 MV
DC Amps Yes
Digital Display Yes
Watertight Yes
DC Volts Yes
Amp Hours Yes
Amp-Hours Range -500 To +500 Amps (Applies To Bank 1 Only)
Alarms High, Low Voltage & Low Amp-Hours
Product Specifications.doc (98 Kb)
Instruction Manual.pdf (160 Kb)

The DCE provides accurate low cost instrumentation for 3 banks of batteries between 9.5 and 33 volts. The unit displays voltage for three banks and amps or amp-hours for the house bank. It tracks all current entering and leaving the house bank and applies Peukert's and efficiency factors. Low and High voltage alarms and Low Amo-Hours Remaining alarms can be set on the house bank. When activated, the built-in 85 dB alarm will sound and the display will flash. The DCE outputs NMEA 0183 serial data or the data line can be programmed as an external alarm output or as a charger on-off control. The DCE comes complete with a precision 500 amp shunt and is designed to work with 50-500 amp 50 mV shunts.

Save this product for later
bottom of page